[Lifetime Warranty] [1/4 Male NPT] 15 inch RV Propane Hoses with Gauge to QCC1 Stainless Steel Braided Camper Tank Hose for RV Camper Standard Two-Stage Regulator - Pack of 2 40Lb 350PS
[1/4 Male NPT] 15 inch RV Propane Hoses with Gauge to QCC1 (Not Inverted Flare) Stainless Steel Braided Camper Tank Hose - 2 Pack
Key Features
- Package Includes: 2x 15-inch propane hoses, 1x roll of thread seal tape
- Hose Length: 15 inches
- Material: Braided stainless steel exterior for abrasion resistance
- Maximum Working Pressure: 350 PSI
- Fittings: QCC1 (Type 1) nut to 1/4-inch Male NPT
- Integrated color-coded pressure gauge indicates gas level
- Certification: CSA certified for safety and quality assurance
Replaces / Cross-Reference Part Numbers
- Universal replacement for 15-inch pigtail hoses with QCC1 and 1/4-inch Male NPT fittings used on standard RV two-stage regulators.
Compatibility & Fitment
- Connects a standard 5 lb to 40 lb propane tank with a QCC1/Type 1 valve to an RV's two-stage regulator.
- Regulator Inlet: Fits standard regulators with a 1/4-inch female NPT inlet port.
- Important: This hose uses a 1/4-inch Male NPT fitting. It is not compatible with regulators that require a 1/4-inch Inverted Male Flare fitting. Verify your regulator's connection type before purchase.
When to Replace
- Visible signs of damage such as cracks, abrasions, or brittleness on the hose.
- Corrosion or physical damage to the brass fittings.
- Gas leaks detected by smell or a soapy water test at the connections or along the hose.
- Pressure gauge is non-functional or provides inaccurate readings.
- As part of routine preventative maintenance on your RV's propane system.
Installation Tips
- Ensure the propane tank valve is fully closed before beginning installation.
- Apply the included thread seal tape to the 1/4-inch Male NPT threads before connecting to the regulator.
- Do not use thread seal tape on the QCC1 tank connection fitting as it seals via an internal gasket.
- Hand-tighten the QCC1 nut onto the propane tank, then tighten slightly with a wrench if necessary. Do not overtighten.
- After installation, open the tank valve and check all connections for leaks using a soapy water solution before use.
$30.52
[Lifetime Warranty] [1/4 Male NPT] 15 inch RV Propane Hoses with Gauge to QCC1 Stainless Steel Braided Camper Tank Hose for RV Camper Standard Two-Stage Regulator - Pack of 2 40Lb 350PS—
$30.52
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
[1/4 Male NPT] 15 inch RV Propane Hoses with Gauge to QCC1 (Not Inverted Flare) Stainless Steel Braided Camper Tank Hose - 2 Pack
Key Features
- Package Includes: 2x 15-inch propane hoses, 1x roll of thread seal tape
- Hose Length: 15 inches
- Material: Braided stainless steel exterior for abrasion resistance
- Maximum Working Pressure: 350 PSI
- Fittings: QCC1 (Type 1) nut to 1/4-inch Male NPT
- Integrated color-coded pressure gauge indicates gas level
- Certification: CSA certified for safety and quality assurance
Replaces / Cross-Reference Part Numbers
- Universal replacement for 15-inch pigtail hoses with QCC1 and 1/4-inch Male NPT fittings used on standard RV two-stage regulators.
Compatibility & Fitment
- Connects a standard 5 lb to 40 lb propane tank with a QCC1/Type 1 valve to an RV's two-stage regulator.
- Regulator Inlet: Fits standard regulators with a 1/4-inch female NPT inlet port.
- Important: This hose uses a 1/4-inch Male NPT fitting. It is not compatible with regulators that require a 1/4-inch Inverted Male Flare fitting. Verify your regulator's connection type before purchase.
When to Replace
- Visible signs of damage such as cracks, abrasions, or brittleness on the hose.
- Corrosion or physical damage to the brass fittings.
- Gas leaks detected by smell or a soapy water test at the connections or along the hose.
- Pressure gauge is non-functional or provides inaccurate readings.
- As part of routine preventative maintenance on your RV's propane system.
Installation Tips
- Ensure the propane tank valve is fully closed before beginning installation.
- Apply the included thread seal tape to the 1/4-inch Male NPT threads before connecting to the regulator.
- Do not use thread seal tape on the QCC1 tank connection fitting as it seals via an internal gasket.
- Hand-tighten the QCC1 nut onto the propane tank, then tighten slightly with a wrench if necessary. Do not overtighten.
- After installation, open the tank valve and check all connections for leaks using a soapy water solution before use.
